Installing KookaBlockly
KookaBlockly is part of the KookaSuite set of code development and editing tools for the Kookaberry microcomputer and other microcomputer boards that can use the Kooka firmware.
The tools that are in KookaSuite are:
- KookaBlockly
a powerful standalone visual editor designed for creating program scripts.
- KookaIDE
a text editor for creating and editing MicroPython program scripts and directly interacting with the Kookaberry control console.
IDE is short for Integrated Development Environment.
- KookaTW
A virtual Kookaberry user interface that replicates the physical user interface on a Kookaberry and provides a user interface for compatible microprocessor boards that do not have a physical user interface.
TW originated as Teacher’s Window, but also stands for TWin, or in some cases Training Window.
Downloading KookaSuite
The latest version of KookaBlockly can be conveniently downloaded from the Kookaberry GitHub repository at https://github.com/kookaberry/kooka-releases/releases.
Choose the latest version compatible with your personal computer. KookaSuite versions available are for:
Microsoft Windows V10 and later
Apple MacOS V10.15 and later
Raspberry Pi OS (32 bit Debian v12 [bookworm])
Click on the hyperlink for the appropriate version of KookaSuite and download it to a folder (default is in the Downloads folder) on your personal computer.
Installing KookaSuite on Microsoft Windows
Double-click on the downloaded
KookaSuite-<version>-Win64.msi
file to launch the Windows Installer. The display in Fig. 2 will then appear.

Fig. 2 Click on Next to proceed.
KookaSuite does not (as yet) have an application trust certificate, so Windows Defender will alert you with the dialogues in Fig. 3 and Fig. 4.

Fig. 3 Click on More info to proceed to the next dialogue.

Fig. 4 Click on Run Anyway to proceed.
The installer will then show the Kookaberry Licence Agreement. The agreement contains a liability disclaimer, then a series of open-source licences for the software that is embedded within KookaSuite.
To obtain a printed copy of the licence, press Print.
Please read the licence conditions and if you accept them, click on the acceptance checkbox to place a tick (as shown in Fig. 5) and then click on Next.

Fig. 5 Click the checkbox to accept the licence, then click on Next to proceed.
The dialogue in Fig. 6 will then appear showing where on your computer the KookaSuite programs will be installed.
Usually the default location of
C:\Program Files\Kookaberry\KookaSuite
is fine, but you or your system administrator may wish to put them elsewhere. If so, click on Change and select the prefered location using the file explorer dialogue which will open.

Fig. 6 Installation location dialogue. Click on Next to proceed.
The next dialogue, shown in Fig. 7, specifies the folder in which KookaSuite will store files.
The default location is
C:\Users\Public\Kookaberry Scripts\
which all users share on a Windows PC. If another location (for example)C:\Users\<your account>\Kookaberry Scripts\
which is unique and private to <your account>) is desired, click on Change and select the preferred location using the file explorer dialogue which will open.

Fig. 7 Scripts location dialogue. Click Next to proceed.
A dialogue then appears, shown in Fig. 8, that provides the opportunity to select which elements if not all of KookaSuite are to be installed. It is recommended that all elements be installed for a fully functional KookaSuite.

Fig. 8 Press Install to proceed with the KookaSuite installation.
A dialogue with a progress bar that tracks the installation progress will appear as in Fig. 9.
There may be a Windows alert asking for permission to proceed. Accept the installation by clicking Yes.
The progress bar will then continue and when it reaches completion the Completed dialogue will appear.

Fig. 9 Click on Finish to exit the Windows Installer.
Installing KookaSuite on MacOS
Double-click on the downloaded
KookaSuite-<version>-macOS.dmg
file to open it. You will see it contains the three KookaSuite apps, as in Fig. 10.

Fig. 10 The contents of the MacOS KookaSuite download package.
Create a suitably named folder in the Macintosh
Applications\
folder and drag the KookaSuite apps into it, as shown in Fig. 11.KookaBlockly will then be available to launch (as will KookaIDE and KookTW) from the Applications icon in the Macintosh taskbar and by any other regular methods for starting Macintosh applications.

Fig. 11 KookaSuite apps copied to the Applications folder.
If a KookaSuite tool has not been run on the Macintosh before, a security warning notice may come up. The procedure for running any KookaSuite tool for the first time is given by the Apple Support website here: https://support.apple.com/en-us/HT202491. After that the Macintosh will trust the software and allow it to run.
Installing KookaSuite on Raspberry Pi
KookaSuite has been compiled to run on the 32 bit version of the Raspberry Pi OS (Operating System), which is based on Debian Linux v12, known as “bookworm”. KookaSuite will not run on earlier versions of the Raspberry Pi OS, nor on the 64 bit version (unless you install dual architecture libraries, which can be complicated).
If your Raspberry Pi OS is an earlier version, you will need to update it. First back-up your Raspberry Pi on some removable media e.g. a USB memory stick. The easiest way is to flash the current 32 bit version onto a new SD-card following the instructions here: https://www.raspberrypi.com/software/ This will set up a new Raspberry Pi OS without any of your files on it. Retain the old Raspberry Pi SD card in case you need to retrieve some information from the older operating system. Then restore your data backup data into the home folder of the new Raspberry Pi OS.
Then proceed to download the KookaSuite-<version>-RPi.zip
file from the the Kookaberry GitHub
repository at https://github.com/kookaberry/kooka-releases/releases.
Unzip the downloaded file into the home folder. This will create a folder containing the three executables KookaBlockly, KookaIDE and KookaTW as shown in Fig. 12.

Fig. 12 KookaSuite apps copied to a folder in the Raspberry Pi’s home folder.
Using the terminal program, install the needed Qt5 modules:
sudo apt install libqt5webkit5
sudo apt install libqt5websockets5
sudo apt install libqt5serialport5
If desired, create Raspberry Pi menu items under Programming
using the Preferences/Main Menu Editor
as shown in Fig. 13 and Fig. 14.

Fig. 13 Configuring KookaSuite apps using the Raspberry Pi’s menu editor.

Fig. 14 The KookaSuite apps as they appear in the Raspberry Pi’s menu.
Script Folders
During installation or first running of KookaSuite, the Kookaberry Scripts\
folder will be created
in the location specified during the installation process or on MacOS and Raspbian in the user’s home folder or documents folder.
If the Kookaberry Scripts\
folder already existed it will not be altered. See Fig. 15.

Fig. 15 The Kookaberry Scripts folder in a fresh KookaSuite installation.
The Kookaberry Scripts\
folder contains two sub-folders:
KookaBlockly\
where KookaBlockly stores the program scripts created by it.KookaIDE\
where KookaIDE stores MicroPython scripts.
It is permissible to create sub-folders within the KookaBlockly\
and KookaIDE\
folders for different projects.
The script selection drop-down boxes in KookaBlockly and KookaIDE will however only scan the first level of sub-folders for scripts.
KookaBlockly Updates
Occasionally when KookaBlockly updates are released, the forms and functions of some blocks may be changed.
Existing KookaBlockly scripts will retain the forms and functions of blocks as last edited. Updates to the blocks are not automatically applied to pre-existing scripts.
If the newer block is desired, then the KookaBlockly script must be edited and the block explicitly replaced by the newer form from the block palette.
Once an older block is removed it can no longer be used as it will no longer be available from the palette of blocks.
Editing KookaBlockly Scripts Using KookaIDE
A KookaBlockly file, designated with the file type suffix .kby.py
,
contains the MicroPython script that is automatically generated by the KookaBlockly editor
as visual blocks are assembled and configured.
At the end of the KookaBlockly file there is a very long comment line which contains the code, in XML (Extended Markup Language) format,
that describes all the blocks, their parameters and their inter-connections.
While it is possible to edit a KookaBlockly file using the KookaIDE editor and to then run it on the Kookaberry, any changes made will not alter the XML block code. As soon as the KookaBlockly file is again opened by the KookaBlockly editor, it will regenerate the MicroPython script based on the XML block code, and it will disregard any changes made to the MicroPython script.
Attempting to edit the XML code directly will likely render the KookaBlockly file unusable by the KookaBlockly editor, so please do not edit the XML code.
Important
Only edit KookaBlockly files using the KookaBlockly editor!